eduroam with Symbian

1. Start from your devices main screen, open the menu and select Settings followed by Connectivity and then Destinations.

2. From Network destinations menu select and open the Internet menu to list your Internet access points.
Now click Options and choose New access point

3. When asked whether to Automatically check for available access points choose No.
Select WLAN then enter eduroam as the WLAN network name. Ensure that eduroam is entered in lower-case characters, then press ok to create the access point. You will be shown some messages while the access point is created.

4. Once the eduroam connection is created it will appear in your internet access points list.
Select and open the eduroam connection to configure the settings.

Configure the various options as detailed below and in the images...

• Set the connection name to eduroam (all lower case).
• Set the Data bearer to Wireless LAN.
• Set the WLAN network name to eduroam (all lower case).
• Set the Network status to Public. Set the WLAN network mode to Infrastructure.
• Set the WLAN security mode to WPA/WPA2.

Select WLAN security settings to open the next menu, then select EAP plug-in settings to commence the next step.

Using the Options menu, disable all the EAP types except EAP-PEAP, so that only EAP-PEAP has a tick next to it. Select EAP-PEAP to open the EAP-PEAP settings window, and then configure the EAP-PEAP settings as below...

• Leave User certificate as not defined.
• Select CA certificate, and choose Thawte Premium Server CA.
• Set User name in use to User-configured.
• Set User name to your user name.
• Set Realm in use to User-defined.
• Set Realm to your user domain. Remember that domain only can be UPVNET, ALUMNO or AAA
• Set TLS privacy = off, Allow PEAPv0 = Yes, Allow PEAPv1 = Yes, Allow PEAPv2 = No

Then click the arrow at the top right (highlighted by the red circle) to move to the next section...

Using the Options menu, disable all the EAP inner types except MSCHAPv2 so that only MSCHAPv2 has a tick next to it.

Select MSCHAPv2 to open the MSCHAPv2 settings window, and then configure the MSCHAPv2 settings as below...

• Set User name to your UPV user with the sintaxis user@domain (being 'domain' UPVNET, ALUMNO or AAA)
• Set Prompt password to No.
• Set Password to your password. Press the Back button.